Pular para as informações do produto
1 de 9

Booster Mini Portable Pocket Massage Gun

Booster Mini Portable Pocket Massage Gun

Preço normal $129.99 USD
Preço normal Preço promocional $129.99 USD
Promoção Esgotado
Frete calculado no checkout.

When you can't get in to see your manual therapy practitioner, use the Booster Mini Portable Pocket Massage Gun at home in between your appointments! Massage guns, also called percussive guns or percussion massagers, can help relieve pain and tension through oscillating, rapid bursts of pressure on the muscle tissue.

The Booster Mini Portable Pocket Massage Gun is the most compact massage gun available on the market measuring in at approximately 5.5 inches / 14.2 cm - roughly the size of a standard cell phone! It comes with a handy carrying case or you can even fit in your pocket making it easy to take it with you anywhere you go! Perfect for self-care, but also a great addition to your professional clinic setting with its triple noise reduction design.

Super Quiet: The Booster Mini's triple noise reduction design includes a duplex bearing drive, a floating shock absorption and a brushless motor. The high power brushless motor produces up to 70W of power and 50 hits per second while only outputting 40 - 60 decibels. That's quieter than most refrigerators!

Super Light: The Booster Mini measures 5.5 inches (14.2 cm) making it easy to hold in the palm of your hand and only weighs 1.15 pounds (521 grams).

Power: The Booster Mini has a Samsung 2900mAh lithium battery and charges in approximately 3 hours through a Type-C USB cable. A full charge will last approximately 8 hours depending on the speeds being used. 900 - 3200 beats per minute with 12-15 lbs of pressure (stall force).

Four Speeds: The second-generation variable pressure control system is used to monitor the pressure in real time. When the strength is increased, the system will increase the motor torque to achieve the relaxation effect of deep muscles.

  1. Speed 1: 900 rpm
  2. Speed 2: 1800 rpm
  3. Speed 3: 2500 rpm
  4. Speed 4: 3200 rpm

Interchangeable Attachments: Your entire kit comes with 4 interchangeable attachments - a large round head for all muscle groups and low intensity, a flat head for all muscle groups and medium intensity, a bullet head targets pain points with strong intensity, and a spinal head for massaging around the spine with strong intensity. The bullet head and spinal head have soft silicone cushions to reduce the risk of muscle damage.

Your Booster Mini package comes with:

  • Booster Mini Unit
  • 4 x Interchangeable Head Attachments
  • Type C Quick Charge USB charging line
  • Storage Bag
  • User Manual

Technical Specs:

Rated Speed: 900-3200rpm

Striking Force: 5-7 kg / 12-15 lbs

Rated Input: 100-240 v-50/60HZ

Power Supply: USB charge (block not included)

Battery Capacity: 2900mAh

Motor Power: 25W

Battery: High energy lithium battery, 3 hours to charge, battery lasts 4~8 hours on full charge

Net weight: 1.15 pounds / 521 grams

Color: Black

Material: Aviation-grade aluminum alloy body

Cleaning

Step 1: Cleaning Your Cups

Immediately after using your cups, soak them in warm soapy water until you are ready to properly clean them. This helps to ensure that any lotions or oils you used during your treatment won't stick to your cups.

Wash your cups thoroughly with a sponge, cloth or device that will ensure you get everything completely clean - don't forget to thoroughly wash the inside of the cup and around the rims.

Rinse your cups thoroughly in hot water.

Shake the excess water off your cups before letting them air dry to prevent microbial growth. It is especially important to ensure that there is no water left on your cups so the disinfecting solution does not get diluted.

​Cleaning alone does NOT kill bacteria.

Step 2: Disinfecting

The recommended process for proper disinfection AFTER you have thoroughly cleaned, rinsed and dried your cups varies from one country to another. Most countries recommend Low Level Disinfection (LLD), however following a High Level Disinfection (HLD) process will ensure you are meeting the highest possible standards.

Please contact your local/regional/country health office to confirm the level of disinfection required for tools and cupping therapy products.

Low Level Disinfection
Among the products recommended for Low Level Disinfection of reusable objects are Bleach, Alcohol**, and Hydrogen Peroxide. Reusable objects such as your cups should be disinfected by completely immersing them in a 3% solution of Hydrogen Peroxide for 30 minutes. Alternatively, a 1:50 dilution of 5.25%–6.15% sodium hypochlorite (household bleach) for 5 minutes would be effective.

Please ensure you wear personal protective equipment such as eye covering and rubber gloves - Bleach and Hydrogen Peroxide can leave chemical burns on your skin.

Ensure that your cups are completely submerged and soak them in the solution for the required time.

Wearing your personal protective equipment, remove your cups from the solution and rinse them EXTREMELY well under warm water for several minutes to remove all of the solution.

Shake off the excess water and let them air dry.

High Level Disinfection
Among the products recommended for High Level Disinfection of reusable objects like your cups are Glutaraldehyde, and Hydrogen Peroxide. Your cups should be disinfected by immersing them in a Glutaraldehyde solution of 2.0% for a minimum of 20 minutes or in a Hydrogen Peroxide solution of 6% to 7.5% for a minimum of 30 minutes.

Please ensure you wear personal protective equipment such as eye covering and rubber gloves - Glutaraldehyde and Hydrogen Peroxide can leave chemical burns on your skin.

Ensure that your cups are completely submerged and soak them in the solution for the required time.

Wearing your personal protective equipment, remove your cups from the solution and rinse them EXTREMELY well under warm water for several minutes to remove all of the solution.

Shake off the excess water and let them air dry.

** A note on using Alcohol...Alcohols are not recommended for disinfecting or sterilizing medical materials principally because they lack sporicidal action. Additionally, the use of Alcohols will break down the silicone compound of your cups over time and cause them to dry out and crack.

If you are looking for an easy-to-use prepared High Level Disinfectant, we recommend Sporox II and PREempt.

What NOT to use:
Please do not use lysol wipes or mouthwash as these do not meet the requirements for proper disinfection.

Please do NOT clean your cups by putting them in your dishwasher or boiling water as these methods can seriously harm your cups and degrade the silicone compound.

Remember that disinfection of your cups is considered the best practice in a health or wellness environment.

How to use

To create a good seal of the cup against your skin, use a massage lotion or oil - we do not recommend using cream or gel.

For the Base Cupping Set - place the silicone cup on your skin, holding the cup with your index finger, middle finger, and ring finger around the edge of the cup and press the top of the cup down with your thumb or palm of your hand. At the same time, lift the edge of the cup slightly with your fingertips so that the air inside of the cup is released. As you gently push down on the top of the cup with your thumb / palm of your hand, release your fingers from the edge of the cup so that it suctions to your skin. It may take some practice to get the right amount of suction. Alternatively, you can squeeze the sides of the cup to form an oblong shape before pressing the cup to the skin.

For the Cellulite Cupping Set - place the silicone cup on your skin, holding the cup in the palm of your hand with your fingers wrapped around the body of the cup. Gently squeeze the cup in the palm of your hand so that the air inside of the cup is released. When you have a good suction to the skin, release your hand from the cup. It may take some practice to get the right amount of suction.


For the Align Cupping Set - place the cup flush against your skin and then press the handle/plunger on the top of the cup downwards to create the negative pressure required to create the seal. After a few seconds, the handle/plunger will automatically return to its upward position and create the suction. Using a small amount of massage lotion or oil will assist in creating a proper seal.


For the Vitality and Button Cupping Set - place the cup against your skin and then push down on the rounded top to create the suction. You can also pinch the sides of the cup to create an oblong shape before placing the cup on the skin and releasing it. This will typically create a medium amount of suction. For maximum suction, pull the sides of the cup down so that it basically 'flips' inside out. Place the ‘inside’ round end of the cup against the skin and press firmly down on the edges for it to ‘snap’ down and flip over. CAUTION: This amount of suction may be extremely uncomfortable for some people.

How to Remove

To release the suction of the cup, gently tilt the cup to the side and slide your fingertip between the skin and the rim of the cup to break the seal.

When removing your cups, NEVER pull the cup directly off the skin as this may cause extensive bruising and/or potential tissue damage and honestly, just doesn't feel nice!

 

Payment Security

We do not store your payment details nor do we have access to your credit card information. All payment information is processed securely.

Return policy

100% Satisfaction Guaranteed

Our #1 priority at Global Cupping is your happiness. Which means we stand by our products 100%, no matter what, no questions asked, no ifs, no ands, no buts. If you have a problem, we will solve it.

​This means you can order from Global Cupping with absolute and complete confidence.

​Refunds

If you are not happy with your product for any reason at all, simply contact our team and let us know within 90 days of receiving your order. We will issue you a return authorization confirmation by email along with instructions to return the product. Once your return is received we will process your refund to your credit card or original method of payment within 1 business day. Please note that shipping costs are not refundable.

​If you haven't received your credit card refund within 2 business days, please first check with your credit card company as it may take some time before your refund is officially posted.

​Defects

We promise that every one of our products will be free of manufacturing defects. In the unlikely event that you experience any manufacturing defects aside from regular use and wear, please contact us and we will happily provide you with a replacement at no cost.

​Returns

To return your product, please contact us for a return authorization confirmation and the address for the return. Please note that you will be responsible for paying the shipping costs for returning the item.

​Depending on where you live, the time it may take for your product to reach us may vary.

If you are returning items valued over $75, we recommend using a track-able shipping service or purchase shipping insurance to ensure that your return is received.

Ver informações completas
  • Commited to You

    Your success = our success🙂 and our desire is to create a true partnership with our customers and not compete "against" them. We made the conscious decision NOT to put our company name or branding on any of our products to encourage your customers to contact you directly about Cupping!

  • Commited to Quality

    Quality should never be a concern!

    With our firsthand relationships with our manufacturers, we are able to guarantee that our products will be free of manufacturing defects. We are also able to ensure that all our products are made from either medical-grade or food-grade platinum-cured silicone with no byproducts or harmful additives.

  • Commited to Savings

    At Global Cupping you never have to ask 'do you ship to my country?'...the answer is always YES.

    Our global distribution network and flat rate shipping ensures that we are able to efficiently and economically serve our diverse and international customer base.

1 de 3